Introducing the all-new Epson SureColor S60600

The 64-inch SureColor S60600 features newly-developed Epson UltraChrome® GS3 4-color solvent ink for outstanding print quality, durability, and media compatibility. When combined with an all-new precision media feeding system and a high-performance Dual-Array PrecisionCore® TFP print head, the SureColor S60600 is capable of producing sellable quality banner at an astonishing 550 ft² per hour, while also producing adhesive vinyl output at up to 310 ft² per hour – making the new SureColor S60600 one the most productive sign printers ever developed.


Base Printing Technology

  •     Advanced PrecisionCore TFP Printhead [A]
  •     8-channel, drop-on-demand, ink jet head
  •     8-cartridge (Cx2, Mx2, Yx2, Kx2)
  •     Epson UltraChrome GS3 ink
  •     Professional-level solvent-based ink technology


Printer Nozzle Configuration
Color and Monochrome 720 nozzles per Color
Smallest droplet size is 4.2 picoliters

1440 x 1440 dpi; 1440 x 720 dpi;
720 x 720 dpi; 720 x 360 dpi

Printer (includes printer, stand, take-in & take-up)
103"(W) x 34"(D) x 53"(H)
Printer weight: 635 lbs

Print Engine Speeds

Print Mode Scrim Banner Adhesive Vinyl
Draft 1,020 ft²/hr n/a
Production 550 ft²/hr 310 ft²/hr
Quanlity 310 ft²/hr 190 ft²/hr

Media Handling
Media input:  Single roll-to-roll,
Minimum: 12" wide up to 64" wide
Cut-sheet size:  17" x 22" up to 64" wide
Media core compatibility:  2" or 3" cored media
Input roll media diameter:  Up to 9.8"
Input roll media weight:  Up to 95 lbs.
Media Weight/Thickness:  From 45 gsm up to 1.0 mm thick
Roll media take-up reel:  Fully automatic "wind in" or "wind out" with tension bar
Output roll media weight:  Up to 95 lbs.

Acoustic Noise Level
Approximately 59 dB(A) according to ISO 7779

Front-End RIP Workflow by ONYX
GamaPrint Pro PANTONE licensed PostScript Language Level 3 Compatible RIP by ONYX. Includes full workflow software with layout, nesting, tiling, custom spot color management, custom media support and RIP queue functionality. The Epson SureColor S60600 is also supported by most leading third-party RIPs and workflows.

ONYX GamaPrint Pro RIP Requirements
Server Workstation:
Windows 7, 8, or 10 (64-bit only)
3.2 GHz Intel® i7 or better 8 GB memory recommended
Client Workstation:
Macintosh® 10.5+, Windows 7, 8, or 10 (64-bit only)

Printer Interfaces
Includes as standard one Hi-Speed USB 2.0
(1.1 compatible) and one Gigabit Ethernet port

Epson UltraChrome GS3 Ink
Black     T890100
Cyan     T890200
Magenta     T890300
Yellow     T890400

Limited Warranty and Service
Standard one-year on-site next business day service with toll-free phone support Monday thru Friday. Optional Epson SureColor S60600 Extended service plans available for purchase for up to three years of total coverage.

Printable Area
Maximum paper width:  64-inch
Minimum paper width:  12-inch
Left and right margins:  0.20" (0.40" total)
Maximum printable width:  63.6-inches
Maximum printable length limited by software application, OS, media length, and RIP

Media Heating System
Pre Heater:  Off or 86° to 122° F (off or 30° to 50°C)
Platen Heater:  Off or 86° to 122° F (off or 30° to 50°C)
Post Heater:  Off or 86° to 131° F (off or 30° to 55°C)
Independently controlled via control panel or front-end RIP

Epson Intelligent Ink Cartridge [B]
Cartridge fill volume:  700 ml each x 4 colors total
Ink cartridge shelf life (recommended):  2 years from printed production date or 6 months after open. The printer is designed exclusively for use with EPSON cartridges for greater reliability.

Image Permanence Ratings
Full Color:  Up to 3 Years

Test results based upon Epson Testing Labs using the ISO 18930 print durability standard. All print results are based upon un-laminated prints printed on adhesive backed vinyl. Durability numbers above are estimates of maximum image permanence.
Your actual results may vary depending upon media type used, environmental display conditions and other factors. Epson does not warrant durability.

Environmental Characteristics
Temperature Operating:  50° to 95°F (10° to 35°C)
Storage: -4° to 104°F (-20° to 40°C)
Relative Humidity
Operating: 20 to 80% (40 to 60% recommended)
Recommended storage: 5 to 85% (no condensation)
Installation requirements: Virtually any location with a typical air conditioning or other air ventilation system. No forced ventilation or air purification systems required. [C]

Electrical Requirements:
Printer:  Requires Two 110v Outlets
Voltage:  20A at AC 110-120 V or 10A at AC 200-240 V
Frequency:  50-60 Hz
Current:  1A at AC 110-120 V or 0.5A at AC 200-240 V

Power consumption:
Printer Operating:  Approx. 650W or Less
Standby Heaters ON:  Approx. 520W
Standby Heaters OFF:  Approx. 30W or less
Sleep:  Less than 3.5W
Power Off:  Less than 0.6W or less
Operating:  Approx. 45W
Sleep:  Approx. 0.3W
Power Off:  Less than 0.6W

[A] The print head is a maintenance part which the user is responsible to replace when necessary. However, Epson covers head replacement while the printer is under the Epson Preferred Limited Warranty and under any Preferred Plus Plan (limited or unlimited number of head replacements, depending on the Preferred Plus Plan purchased). The life of the print head will vary depending on the user's print volume, print patterns and heater temperature for print settings. Doing proper user maintenance of the print head will help prolong its life.

[B] The printer is designed to use only EPSON ink cartridges and not other brands of new or refilled cartridges, or other brands of ink or bulk ink systems. Using EPSON cartridges is important for reliable performance and high image quality. Epson offers voluntary recycling of spent ink cartridges.

[C] Based on testing of one printer at a maximum ink duty in a room of 180 m3 and a ventilation coefficient of 2.2 (without any fan or air conditioning). For more information see the MSDS sheets in the download section.